Description
AOSept Plus with HydraGlyde is a preservative-free, aqueous(hydrogen peroxide 3%) Contact Lens Care solution that cleans, disinfects, neutralises (minimum soak time 6 hours), removes protein and stores all types of contact lenses including silicone-hydrogels.
Directions
NEVER put AOSEPT PLUS with HydraGlyde solution into your eye OR onto a contact lens immediately before inserting the lens into your eye. Otherwise, burning and stinging will result.
1. Wash your hands and dry them with a clean, lint free towel.
2. Open the lens holder marked “L”, remove your left lens and place it on the dome. Close lens holder taking care to avoid trapping your lens.
3. Repeat procedure with your right lens placing it on the dome of the other lens holder marked “R”.
4. Open the flip top cap on the AOSEPTTM PLUS with HydraGlyde bottle and bend it back and out of the way.
5. Thoroughly rinse the lenses in the lens holders with AOSEPT PLUS with HydraGlyde for 5 seconds.
6. Fill the cup with AOSEPTTM PLUS with HydraGlyde solution to the fill-line. DO NOT UNDERFILL OR OVERFILL.
7. Place lens holder in the lens cup and screw closed. Do not over tighten the AOCup lens case (only tighten finger tight). DO NOT SHAKE THE LENS CASE.
8. Store lens case upright - If bubbles leak from the hole in the top of the lens case’s cap, non-neutralised AOSEPTTM PLUS with HydraGlyde solution may be present. Empty the solution from the lens case and wash off any spillage from the surface on which the AOCup lens case was standing. Thoroughly rinse the lens cup and lens holder with sterile saline. If spillage occurs, clean up immediately with a paper towel. Wash your hands thoroughly before handling your lenses or touching your eyes. REPEAT THE DISINFECTION PROCEDURE ABOVE.
9. Allow lenses to soak for a minimum of 6 hours or overnight to neutralise solution.
10. After washing, rinsing and drying your hands, remove your lenses from lens holder.
11. If desired or recommended by your eye care professional: Rinse lenses before insertion with STERILE SALINE after neutralisation. Do not use AOSEPT PLUS with HydraGlyde to rinse lenses before insertion.
12. Your lenses are now ready to wear.
13. Discard used solution, rinse the lens cup and lens holder with sterile saline - DO NOT USE TAP WATER OR OTHER NON-STERILE LIQUIDS.
14. Allow them to air-dry by inverting the lens holder outside the cup. Do not place the lens case on its side.
15. If you do not intend to wear your lenses immediately after disinfection/neutralisation, you may store them in the neutralised AOSEPTTM PLUS with HydraGlyde solution, in the unopened AOCup lens case for up to 14 days. After this time, your lenses must be cleaned and disinfected with AOSEPT PLUS with HydraGlyde prior to wear. A solution used for cleaning, disinfecting, protein removal or storing reusable contact lenses.
Warnings
For full product use and safety information, it is essential to read the enclosed instructions for use. Always follow the described regimen
Ingredients
Hydrogen Peroxide 3%, Phosphonic Acid, Sodium Chloride, Phosphate, Poloxamer, HydraGlyde Moisture Matrix (EOBO-21— Polyoxyethylene-Polyoxybutylene).
Storage
Store as directed
$57.99
AOSEPT Plus Hydraglyde Twin Pack
Size: 2 x 360mL
Description
AOSept Plus with HydraGlyde is a preservative-free, aqueous(hydrogen peroxide 3%) Contact Lens Care solution that cleans, disinfects, neutralises (minimum soak time 6 hours), removes protein and stores all types of contact lenses including silicone-hydrogels.
Directions
NEVER put AOSEPT PLUS with HydraGlyde solution into your eye OR onto a contact lens immediately before inserting the lens into your eye. Otherwise, burning and stinging will result.
1. Wash your hands and dry them with a clean, lint free towel.
2. Open the lens holder marked “L”, remove your left lens and place it on the dome. Close lens holder taking care to avoid trapping your lens.
3. Repeat procedure with your right lens placing it on the dome of the other lens holder marked “R”.
4. Open the flip top cap on the AOSEPTTM PLUS with HydraGlyde bottle and bend it back and out of the way.
5. Thoroughly rinse the lenses in the lens holders with AOSEPT PLUS with HydraGlyde for 5 seconds.
6. Fill the cup with AOSEPTTM PLUS with HydraGlyde solution to the fill-line. DO NOT UNDERFILL OR OVERFILL.
7. Place lens holder in the lens cup and screw closed. Do not over tighten the AOCup lens case (only tighten finger tight). DO NOT SHAKE THE LENS CASE.
8. Store lens case upright - If bubbles leak from the hole in the top of the lens case’s cap, non-neutralised AOSEPTTM PLUS with HydraGlyde solution may be present. Empty the solution from the lens case and wash off any spillage from the surface on which the AOCup lens case was standing. Thoroughly rinse the lens cup and lens holder with sterile saline. If spillage occurs, clean up immediately with a paper towel. Wash your hands thoroughly before handling your lenses or touching your eyes. REPEAT THE DISINFECTION PROCEDURE ABOVE.
9. Allow lenses to soak for a minimum of 6 hours or overnight to neutralise solution.
10. After washing, rinsing and drying your hands, remove your lenses from lens holder.
11. If desired or recommended by your eye care professional: Rinse lenses before insertion with STERILE SALINE after neutralisation. Do not use AOSEPT PLUS with HydraGlyde to rinse lenses before insertion.
12. Your lenses are now ready to wear.
13. Discard used solution, rinse the lens cup and lens holder with sterile saline - DO NOT USE TAP WATER OR OTHER NON-STERILE LIQUIDS.
14. Allow them to air-dry by inverting the lens holder outside the cup. Do not place the lens case on its side.
15. If you do not intend to wear your lenses immediately after disinfection/neutralisation, you may store them in the neutralised AOSEPTTM PLUS with HydraGlyde solution, in the unopened AOCup lens case for up to 14 days. After this time, your lenses must be cleaned and disinfected with AOSEPT PLUS with HydraGlyde prior to wear. A solution used for cleaning, disinfecting, protein removal or storing reusable contact lenses.
Warnings
For full product use and safety information, it is essential to read the enclosed instructions for use. Always follow the described regimen
Ingredients
Hydrogen Peroxide 3%, Phosphonic Acid, Sodium Chloride, Phosphate, Poloxamer, HydraGlyde Moisture Matrix (EOBO-21— Polyoxyethylene-Polyoxybutylene).
Storage
Store as directed
Related products